Supply & Return Duct Cleaning in Katy
Targeted source removal for the runs that actually need it.
01Katy — the housing record
What Katy actually has behind its walls.
Before anyone quotes a duct job here, this is the stock they are quoting against. It is public Census data, and it is different in every city we cover.
- Housing units
- 8,129
- Built pre-1980
- 10%
- Built 2000s
- 29%
- Built since 2010
- 40%
- Gas heat
- 60%
- Electric heat
- 37%
- Single-family
- 86%
U.S. Census Bureau, American Community Survey 5-Year Estimates (2023), tables B25034, B25040 and B25024. Percentages are rounded and describe the city, not your house.
What that means for ducts
New-build ductwork
Roughly 40% of Katy's homes were built since 2010. New does not mean clean: the commonest thing we pull out of a five-year-old system is the construction phase itself — drywall fines, sawdust, insulation fiber — plus builder-grade flex that was kinked or crushed on the day and has been throttling that run ever since. Photographs matter more here, not less.
That is a reading of the city’s stock, not a diagnosis of your home. Which of it applies to you is exactly what the camera settles — and why we would rather run one than quote from a postcode.
02Working in Katy
The part that changes from street to street.
Katy is a young housing market with an old water story, and both shape what your ductwork needs. A large share of homes inside the city were finished after 2010, which means the systems have not been running long enough to collect much of anything from use. What they carry instead is construction debris left in the boots before the registers went on, and that is a single cleanup rather than a recurring service. The water part matters differently. Homes in the reservoir and bayou watersheds have taken on floodwater in the past, and duct liner, insulation and air handlers that were submerged cannot be restored by cleaning. They get replaced. Katy also leans heavily on gas furnaces, most of them mounted in the attic, where nine idle humid months leave dust on a cold cabinet and produce a strong burning smell on the first cold morning. That smell usually starts at the furnace, not in the duct.
Katy Mills
- Cinco Ranch ·
- Cross Creek Ranch ·
- Seven Meadows ·
- Firethorne ·
- Old Katy
County
Fort Bend County
Same standard in Katy as everywhere else.
Source removal to the NADCA ACR standard, a written quote before anything is touched, and camera photographs of your own runs before and after. We are not going to re-argue that on every city page — it is set out once, in full, on the service page.
- Camera confirmation of which runs need work before you approve anything
- Negative-pressure source removal on the affected trunks and branches
- After photos of every cleaned run
- A written note of the runs verified clean and left alone
- From
- $199
- On site
- 2–3 hours
- Scope
- 4 lines
Prices shown are starting estimates and may change with the condition, access, and scope we find on site. Only a written quote from an on-site visit is a price we commit to.
03Supply & Return Duct Cleaning — in this stock
Cleaning a system that is still carrying its own build.
A post-2010 system is usually not dirty in the way people picture. What comes out is the construction phase — drywall fines, sawdust, insulation fiber — that was pulled into open ducts before the house was ever occupied, plus whatever a kinked flex run has been collecting behind the crimp. That is a different cleaning: shorter, more targeted, and far more dependent on the before-and-after photographs, because the difference is not something you can smell.
How do you know cleaning part of the system is enough?
The camera decides, not a hunch. We scope the whole system first; if debris is concentrated in the returns or specific branches, we clean those and document the rest as verified clean.
Why are return ducts dirtier than supply ducts?
Because they run upstream of the filter. Returns pull raw room air — dust, pet hair, fibers, pollen tracked in on shoes — straight into the ductwork before anything filters it.
04Book in Katy
Three fields, and a person calls you back.
Tell us the ZIP and we will tell you what your system likely needs — including, sometimes, that it needs nothing yet. Nothing is charged until you have approved a written quote.
05Questions
Asked in Katy, answered straight.
How do you know cleaning part of the system is enough?
The camera decides, not a hunch. We scope the whole system first; if debris is concentrated in the returns or specific branches, we clean those and document the rest as verified clean. If footage shows buildup everywhere, we'll say a full cleaning is the honest recommendation — with the photos to prove it.
Why are return ducts dirtier than supply ducts?
Because they run upstream of the filter. Returns pull raw room air — dust, pet hair, fibers, pollen tracked in on shoes — straight into the ductwork before anything filters it. Supplies only see air the filter has already scrubbed. That asymmetry is why return-side cleaning is often the smartest partial job.
We're in a Katy home built after 2015. Is a duct cleaning worth it?
Usually not for accumulation. Systems that new are clean from use, and what they may carry is construction debris in the boots. One look answers it. If the builder capped the openings during drywall, we will tell you to put the money into filtration and humidity control instead.
Our neighborhood took on water in a past storm. What should we be checking?
Anything that was submerged. Reservoir and bayou flooding reached ductwork in some Katy homes, and soaked flex liner, insulation and air handler components cannot be restored by cleaning. Replacement of the affected sections is the honest answer, and we document what was wet and what was not.
Most homes here have a gas furnace in the attic. Does that change anything?
It does. A gas furnace sitting in a humid Katy attic through nine idle months collects dust on a cold cabinet and can smell strongly on the first cold morning. We inspect the cabinet and flue connection alongside the duct, because that smell almost always starts there rather than in the branches.
Last reviewed: