Air duct work in Floresville, TX
Manufactured homes are common enough around Floresville that we carry different tooling for them, and the duct system inside one has almost nothing in common with an attic system. Supply air travels through a trunk inside the floor cavity and comes up through registers in the floor.
01Where to start in Floresville
Not every city needs the same thing first.
A new-build system is usually carrying its own construction phase — drywall fines and sawdust — plus flex that was kinked on the day. The dust-out and the right filter matter more here than a full clean.
01$99Camera Duct Inspection & Air-Quality Assessment
See inside your ducts before you spend a dollar on cleaning.
02$449New-Construction Duct Dust-Out
Construction debris out of the ducts before you move in.
03$99Filtration Upgrade Consultation
The right MERV rating for your system — no guesswork, no overkill.
An ordering suggested by the city’s housing record below — not a diagnosis of your home. Prices shown are starting estimates and may change with the condition, access, and scope we find on site. Only a written quote from an on-site visit is a price we commit to.
02The record
Floresville by the numbers that actually change the work.
- Housing units
- 3,192
- Built pre-1980
- 24%
- Built 2000s
- 32%
- Built since 2010
- 30%
- Gas heat
- 23%
- Electric heat
- 75%
- Single-family
- 66%
U.S. Census Bureau, American Community Survey 5-Year Estimates (2023), tables B25034, B25040 and B25024. Percentages are rounded and describe the city, not your house.
What that means for ducts
New-build ductwork
Roughly 30% of Floresville's homes were built since 2010. New does not mean clean: the commonest thing we pull out of a five-year-old system is the construction phase itself — drywall fines, sawdust, insulation fiber — plus builder-grade flex that was kinked or crushed on the day and has been throttling that run ever since. Photographs matter more here, not less.
That is a reading of the city’s stock, not a diagnosis of your home. Which of it applies to you is exactly what the camera settles — and why we would rather run one than quote from a postcode.
On the ground in Floresville
Manufactured homes are common enough around Floresville that we carry different tooling for them, and the duct system inside one has almost nothing in common with an attic system. Supply air travels through a trunk inside the floor cavity and comes up through registers in the floor. In a doublewide there is also a crossover duct, a flexible tube slung underneath that carries air from one section to the other, and it is the most common failure we find out here. It sags onto the dirt, an animal opens it, or it was never clamped properly at one collar, and from that moment the system is conditioning the space under the house while the far end of the home never gets comfortable. Floor registers create the other half of it, since everything swept, spilled or dropped on a floor ends up in the duct below it. In the site-built parts of town the older streets near the square carry systems retrofitted into houses that were framed without them, while the subdivisions on the edges are recent enough that whatever is in the ducts arrived with the drywall.
- Riverwood ·
- Eagle Creek Ranch ·
- Historic Downtown ·
- River Oaks
County
Wilson County
03Everything we do in Floresville
The whole list, with the prices on it.
Duct Cleaning
5Inspection & Diagnostics
3Sealing & Repair
4Treatments & Purification
4Construction & Renovation
2Comfort & Scent
1Commercial
104Book in Floresville
We cover all 1 Floresville ZIP codes.
Leave three fields and a person calls back. Nothing is charged until you have approved a written quote — and if the camera says your system is fine, that is what we will tell you.
05Questions
Asked in Floresville.
One section of our doublewide never cools. Where do you look first?
Under the house, at the crossover duct. It is the single most likely cause of one section running hot, and the failure is visible: a tube on the ground, a torn belly, or a collar that has slipped off the takeoff. If it is torn or has been lying in dirt it needs replacing rather than cleaning, and that is under-home work with its own price, quoted before we start.
Can floor ducts be cleaned properly?
The reachable portion can, and it is usually worth it, because a floor duct catches more solid debris than any overhead system ever will. The limitation is that we work from the register openings and the plenum, so a section that has been crushed by a floor jack or has taken water gets photographed and reported rather than brushed. Wet duct in a floor cavity is a repair conversation, not a cleaning one.
Our house near the square is old and the ductwork was clearly added later. What should we expect?
A mapped route before a quote. Where a system was fitted into a house framed without one, the runs tend to thread through closet chases and low crawl spaces with more turns than anyone planned, and the return is usually a single grille doing all the work. In those houses sealing the return and correcting a crushed section typically improves things more than cleaning the branches does.